2dollah
Frequent Wheelers
Posts: 118
|
Post by 2dollah on Jan 11, 2007 18:36:53 GMT -5
Snakepants Dancer is in tha house. I am hoping the deal goes thru with Randy getting Daves 4ruggy or whatever you want to call it. Good deal with ARB's, duals, and new motor! I will post up pics of my tubework on the truck when the build commeneces.
|
|
|
Post by I Am Batman on Jan 11, 2007 19:07:34 GMT -5
There goes the neighborhood..
|
|
|
Post by Rizzle on Jan 11, 2007 23:30:40 GMT -5
I hope i get it, talked to him some more today.
|
|
daddyja
Frequent Wheeler
Supporting Member
Why do i have to get married? I didn't do anything wrong.
Posts: 1,283
|
Post by daddyja on Jan 12, 2007 0:29:14 GMT -5
so what is it man, got any pics???
|
|
Pauly383
Frequent Wheeler
Regular dude.
Down in the AZ
Posts: 125
|
Post by Pauly383 on Jan 12, 2007 1:11:42 GMT -5
There goes the neighborhood.. Not yet , Dave hasn't come over from crawlin yet
|
|
2dollah
Frequent Wheelers
Posts: 118
|
Post by 2dollah on Jan 12, 2007 11:35:28 GMT -5
I haven't told Dave about this place yet. The rig Randy might get is an 85 4runner that has the back cut off and full tubework in the back. It still seats 4 and has a storage area. My guess is Randy will change some of it because the rear is kinda ugly. The tubework is good though. Bent it myself! Here's the specs: Rebuilt 22re with header 4.88's with ARB's front and rear and compressor. Oldschool ringed longs with 2 spares (these things are still pretty strong - I beat on em with my 38.5's and they held up good. I just switched to 30 spliners as one started to make a little noise) Dual stock cases 38.5x14.5x15 SX's Yay. These things are indesructable. Plus they have already been grooved. Spare CV drive shaft - works for front and rear. CV shafts front and rear Budbuilt crossmember Marlin's hi-steer set up with FJ-80 ends Alcan custom leaf springs. These things are the chit: www.alcanspring.com/index.htmExtended shackles Optima Duecth (sp) Tech front shocks and Desert rattlers in the rear so you'll want to put in some bilsteins. Extended shock mounts front and rear to handle 12" travel front and 14" travel rear.
|
|
|
Post by abducted_by_an_alien on Jan 12, 2007 15:53:39 GMT -5
sounds good...!
4 cyls are the shiznit! ....as are 208's. ;D
Marv
|
|
2dollah
Frequent Wheelers
Posts: 118
|
Post by 2dollah on Jan 12, 2007 16:51:22 GMT -5
Marv you may remember me. I worked for Dipshit, I mean Shawn at the Mesa store a while back. What's the deal with 208's. I always thought they were supposed to be avoided.
|
|
|
Post by I Am Batman on Jan 12, 2007 19:17:10 GMT -5
Marv you may remember me. I worked for Dipshit, I mean Shawn at the Mesa store a while back. What's the deal with 208's. I always thought they were supposed to be avoided. Marvs buggy is built outta garbage so he loves them cause they get tossed! That and he runs like 4 in a row or something
|
|
daddyja
Frequent Wheeler
Supporting Member
Why do i have to get married? I didn't do anything wrong.
Posts: 1,283
|
Post by daddyja on Jan 13, 2007 0:35:26 GMT -5
Marv you may remember me. I worked for Dipshit, I mean Shawn at the Mesa store a while back. What's the deal with 208's. I always thought they were supposed to be avoided. Marvs buggy is built outta garbage so he loves them cause they get tossed! That and he runs like 4 in a row or something I thought it was kind of strange when he busted the one on Ruler and parked it. I was like "isnt there 2 or 3 more under there"?
|
|
|
Post by I Am Batman on Jan 13, 2007 16:05:19 GMT -5
He broke the mount.. They keep twisting the ears off the case.
|
|
|
Post by SuperDave on Jan 13, 2007 18:24:57 GMT -5
There goes the neighborhood.. Not yet , Dave hasn't come over from crawlin yet I resemble that statement!
|
|
|
Post by abducted_by_an_alien on Jan 13, 2007 18:28:43 GMT -5
I always thought they were supposed to be avoided. They are.... at all costs...! give them to ME.....! ;D Marv
|
|