Pauly383
Frequent Wheeler
Regular dude.
Down in the AZ
Posts: 125
|
Post by Pauly383 on Feb 15, 2007 18:05:19 GMT -5
Last time I change my mind . Its decided to by the wife and I . I will finish this year out with wheeling the Blazer . And then transfer the whole drivetrain into my truggy . This is easy as the truggy has the same frame , same year . I will just omit the a/c sub harness , and use the heater . The Blazer will be detagged and uninsured and stored until I get the Chevelle done . Then its getting the body fixed . Of course I will keep adding to the Blazer in the meantime , the crossover and such . it will all unbnolt anyway . And I have rolling axles for the Blazer . BTW , hope I have made it a little lively here the last couple days
|
|
|
Post by f250crawler on Feb 15, 2007 20:25:18 GMT -5
yea its usually dead around here
|
|
|
Post by I Am Batman on Feb 15, 2007 22:24:16 GMT -5
yea its usually dead around here It is sometimes dead around here!
|
|
|
Post by f250crawler on Feb 15, 2007 22:25:12 GMT -5
i dunno why??
|
|
|
Post by hoss50 on Feb 15, 2007 22:58:12 GMT -5
Remember, keep it light and keep it simple. That is the key to success in a truggy. It sounds like a good plan to me. I have decided to put my K5 on the shelf also to keep it road worthy and I plan to turn it into a DD possible/hunting/light-moderate wheeler.
I have a few more plans for the K5 to upgrade it but after those things are done it is going to stop being bashed super hard. I am going to build a buggy in the near future to thrash with.
Harley
|
|
|
Post by az-k5 on Feb 15, 2007 23:12:13 GMT -5
Ya know paul. I might pull my chassis this summer and tube off the frame. I would let mine go for a smokin price. It still uses the stock radiator body mounts and the 4 main ones under the cab. The rest is attached with bushings at the frame. It actually lifts off (with some prying).
|
|
Pauly383
Frequent Wheeler
Regular dude.
Down in the AZ
Posts: 125
|
Post by Pauly383 on Feb 16, 2007 0:12:49 GMT -5
Ya know paul. I might pull my chassis this summer and tube off the frame. I would let mine go for a smokin price. It still uses the stock radiator body mounts and the 4 main ones under the cab. The rest is attached with bushings at the frame. It actually lifts off (with some prying). Done , if your serious . I can get the funds by then . All I need to do is remove my body and winch mount . Cool . Maybe Nate would want my already mainly cut body before he cuts his up
|
|