|
Post by tempekrawler on Apr 22, 2007 3:32:52 GMT -5
Pipe Dream........................ Dedenbear, and spidertrax make aftermarket inner C's and hub assemblies. If you have a stout axle, but keep popping U joints or stub shafts or even hubs you could upgrade to D 60 strength for half the cost. How? Weld on these inner C's and hubs, have custom inner shafts made to fit your housing, (30 spline available for 30's, 33 and 35 spline ARB's for 44's and I've heard of 40 spline on 9 inch). This was my pipe dream because I have a stoute high clearance 8 lug HP 44, and feel the major flaw is the small 19 spline stub shaft, the U- joint size next. WIth a 35 spline ARB and 35 spline outter this axle would have the strength of a LP 60 with 35 spline axles and the clearance of a LP 30. I dont know the Diameter on the inner C's for the spidertrax www.spidertrax.com/s.nl/sc.7/category.192/.fbut the dedenbears have multiple sizes for 5 6 and 8 lug 10 bolts 44's and 30's. Just a thought, I hope this inspires more people to dream on polishing their turds instead of buying up harder to find Dana 60's
|
|